GA Front-mounted Pneumatic Rotary Chuck Hydraulic Chuck - Vice Jaw Type

It has a central through hole and supports rear feeding.

GM High-Precision Diaphragm Series Pneumatic Rotary Chucks

The repeat clamping accuracy is within 0.005 mm.

GD Series High-Precision Diaphragm Pneumatic Rotary Chucks | Pneumatic Rotary Chucks with Diaphragm

It is suitable for clamping thin-walled and fragile workpieces, and the clamping force can be finely adjusted.

DR-636R High-speed Pneumatic Rotary Cylinder with a Central Air Cavity

It has a central through hole with a diameter of 36 mm and can cooperate with the automatic loading and unloading system. It features a lightweight design and low temperature rise.

CHP206-SS42/JAP207-42BZI Rotary Hydraulic Collet Chucks

Specially designed for the clamping automation of the fourth axis/fifth axis of the machining center. It adopts parallel pull-back clamping, providing high precision and clamping stability.

JA5/JA7/JH5/JH7/JH9 Oil and Air Pressure Quick Rotary Chucks

The quick chucks have a built-in hydraulic/pneumatic rotary cylinder, eliminating the need for additional installation of a rotary cylinder. It is easy to install and enables the quick establishment of a working clamping system. The cylinder body of

JAP200 rotary pneumatic collet chuck

The product has a complete range of models, including 5C, 16C, B42, B60 and B80 collets. The maximum clamping diameter that can be selected can reach up to 80 mm (JAP210 - B80).

JAP100 rotary pneumatic diaphragm chuck

It is applicable to workpieces that are brittle, fragile and easy to deform. The entire series need to be used in combination with the three-point set of 5μm grade.

JPCA precision pull-back collet chuck

It is driven by the hydraulic rotary cylinder during operation and has a high clamping force. The opening degree of the collet is more than 0.5 mm, which is suitable for the automatic feeding operation of the manipulator.

JAS/JHS oil and air pressure fixed chucks - push-forward type

It is dust-proof, chip-proof and cutting fluid-proof. The chuck is designed with a forced material discharging function, which can avoid material jamming.

CAF fixed chuck for oil and gas pressure

The chuck has a forced material discharging design and there will be no material jamming. It is driven by compressed air and is easy to install. It features low cost, high performance and a long service life.

CPB pull-back collet chuck - American standard 5C/16C

The maximum diameter of the 5C collet is 26 mm. The maximum clamping diameter of the 16C collet is 40 mm.